Thanks in large part to advances in protective coatings and insulation products, buildings big and small can be clad in a variety of materials; when creatively sheathed, even a basic box can achieve an anything-but-ordinary appearance.
Thermocromex (at top)
Thermocromex
This limestone plaster ultra-high-performance cladding is a technically innovative reformulation that can be applied to virtually any substrate, including CMU, frame/sheathing, tilt wall, poured-in-place concrete, and lightweight blocks/cement. Available in custom colors, Thermocromex delivers a vibrant and permanent finish that requires no other coloring or topcoat. The alkali- and UV-resistant pigments will not fade over time, and the finish is both weatherproof and breathable. Almost no maintenance is required to enjoy the original appearance, year after year. Features a 20-year material performance warranty.
Koda XT
3form
A product line developed specifically for exterior projects, Koda XT offers color, durability, and design freedom for the most extreme environments and applications. These panels exhibit the highest performance of any engineered resin panels. The material has the added benefits of being constructed from polycarbonate, which is both environmentally responsible and high-performing.
ProdEX
Prodema
With an outer film of PVDF, ProdEX wood panels have no need for regular maintenance. The PVDF film is also anti-graffiti and non-stick, preventing organic matter from accumulating on the panel’s surface and reducing the build-up of dust and dirt caused by pollution. ProdEX is a suitable cladding material for ventilated façades, offering protection from rain, sunlight, and external temperature changes.
Insulated Metal Panels
Metl-Span
These state-of-the-art insulated metal panels perform reliably, are aesthetically pleasing, and come with a proven sustainability track record. Cost-effective and energy-efficient, they are easy to install, ensuring a schedule-satisfying build-speed.
TerraPreCast
Boston Valley Terra Cotta
For decades, architectural designs have involved embedding a facing material in precast concrete panels. TerraPreCast is now available as a finishing material for precast concrete. A minimum 30mm solid terra cotta veneer as well as units with custom profiles can be embedded in large precast units. The dovetail profile on the backside of the veneer provides additional surface area for the concrete to adhere to the terra cotta, ensuring a high-strength bond between the two products. This system is ideal for conditions requiring the strength and durability of precast concrete construction, but desiring the myriad of options available in both profile and finish offered by terra cotta. TerraPreCast panels are available in 2-inch height increments from 6 inches to 24 inches. The maximum length for the panel is 60 inches. Custom product available.
Metalwërks Arcwall DBV Rainscreen
Metalwërks
This drained, back-ventilated (DBV) design provides an interesting exterior appearance while protecting the building’s primary air/water seals from the elements. The wall system incorporates exterior moisture resistant applied insulation, engineered furring, and perimeter flashings all outboard of the primary building air barrier. A unique fabrication capability includes a back-scored technique to V-groove the 0.125-inch-thick aluminum plate material down to .040-inch-thick at the fold lines. This method allows the designer to incorporate tighter bend lines, which increases the crispness of the joints and panel edges. The open vertical reveals joint are gasketed to minimize water penetration between the custom panel end-caps and open horizontal joints. The rainscreen system, with its variable patterns, casts numerous shade and light patterns as light changes throughout the day, and the anodized finish creates additional reflections to enhance the effect.
